Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Action for storm control on the interface
Restoration period of the interface
Strom control Trap
10.6.4 Configuring storm control
Storm control and VLAN-based rate limiting are exclusive. We do not recommend
enabling them on the same interface concurrently.
Configure storm control for the ISCOM2600G-HI series switch as below.
1
2
3
4
5
6
7
Step
Raisecom#config
Raisecom(config)#storm-control
detection enable
Raisecom(config)#interface
type interface-number
Raisecom(config)#vlan
Raisecom(config)#interface port-
port-channel-number
channel
Raisecom(config-
gigaethernet1/1/port)#storm-control
{ broadcast | unknown-multicast | dlf
| all } { bps
value
pps
}
Raisecom(config-vlan)#storm-control
{ broadcast | unknown-multicast | dlf
| all } { bps
pps
value
}
Raisecom(config-portchannel)#storm-
control { broadcast | unknown-
multicast | dlf | all } { bps
[
burst
value
Raisecom(config-
gigaethernet1/1/port)#storm-control
action { shutdown | drop }
Raisecom(config-
gigaethernet1/1/port)#storm-control
interval second
Raisecom(config-
gigaethernet1/1/port)#storm-control
trap enable
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Function
Command
interface-
vlan-id
value
value
[
burst
value
value
[
burst
value
]
| pps
value
}
interval
Default value
Discarding packets
300s
Disable
Description
Enter global configuration
mode.
Enable storm control
enhancement.
Enter physical layer interface
configuration mode, VLAN
configuration mode, or
aggregation group
configuration mode.
Enable storm control on the
interface, VLAN, or the
LAG, and configure the
]
|
storm control threshold.
]
|
Configure the action for
storm control on the
interface.
Configure the restoration
period of the shutdown
interface.
Enable storm control Trap.
10 Security
428
Advertisement
Table of Contents
