Configuring Ethernet Locked Signal - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
4
5

1
2
3

9.3.9 Configuring Ethernet locked signal


1
2
3
4
5

1
2
Step Command
Raisecom(config-
service)#service ais
period { 1 | 60 }
Raisecom(config-
service)#service ais
level
level
Configuring AIS on the customer-layer device
Step Command
Raisecom#config
Raisecom(config)#service
cis-id
level
Raisecom(config-
service)#service suppress-
alarms enable mep {
| all }
Configuring Ethernet locked signal on the server-layer device
Step Command
Raisecom#config
Raisecom(config)#serv
ice cisid level
Raisecom(config-
service)#service lck
start mep { all |
mep-list }
Raisecom(config-
service)#service lck
period { 1 | 60 }
Raisecom(config-
service)#service lck
level
level
Configuring Ethernet locked signal on the client-layer device
Step Command
Raisecom#config
Raisecom(config)#service
cis-id level
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Configure the AIS delivery period.
By default, the period for sending AIS is 1s.
Configure the level of the customer layer MD to
which AIS is sent.
Enter global configuration mode.
Enter service instance configuration mode.
level
Enable alarm suppression.
By default, this function is enabled.
mep-id
Enter global configuration mode.
Enter service instance configuration mode.
level
Enable the function of sending LCK packets.
By default, this function is disabled.
Configure the period for sending LCK packets.
By default, the period for sending LCK packets is
1s.
Configure the level of LCK which is sent to the
client-level MD.
Enter global configuration mode.
Enter service instance configuration mode.
level
Description
Description
Description
Description
9 OAM
380