Table of Contents
Advertisement
Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
Step
8
9
10
2.6.6 Configuring edge interface
The edge interface indicates that the interface neither directly connects to any devices nor
indirectly connects to any device through the network.
The edge interface can change the interface status to forward quickly without any waiting
time. You had better configure the Ethernet interface connected to user client as edge interface
to make it quick to change to forward status.
The edge interface attribute depends on actual condition when it is in auto-detection mode;
the real port will change to false edge interface after receiving BPDU when it is in force-true
mode; when the interface is in force-false mode, whether it is true or false edge interface in
real operation, it will maintain the force-false mode until the configuration is changed.
By default, all interfaces on the ISCOM2600G-HI series switch are configured in auto-
detection attribute.
Configure the edge interface for the ISCOM2600G-HI series switch as below.
Step
1
2
3
2.6.7 Configuring link type
Two interfaces connected by a point-to-point link can quickly transit to forward status by
transmitting synchronization packets. By default, MSTP configures the link type of interfaces
according to duplex mode. The full duplex interface is considered as the point-to-point link,
and the half duplex interface is considered as the shared link.
You can manually configure the current Ethernet interface to connect to a point-to-point link,
but the system will fail if the link is not point to point. Generally, we recommend configuring
this item in auto status and the system will automatically detect whether the interface is
connected to a point-to-point link.
Configure the link type for the ISCOM2600G-HI series switch as below.
Command
Raisecom(config)#spanning-tree
value
transit-limit
Raisecom(config)#spanning-tree
value
forward-delay
Raisecom(config)#spanning-tree
value
max-age
Command
Raisecom#config
Raisecom(config)#interface
interface-type interface-number
Raisecom(config-
gigaethernet1/1/port)#spanning-tree
edged-port { auto | force-true |
force-false }
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Description
(Optional) configure the maximum
transmission rate of the interface
(Optional) configure forward
delay.
(Optional) configure the maximum
age.
Description
Enter global configuration mode.
Enter physical layer interface
configuration mode.
Configure attributes of the RSTP
edge interface.
2 Ethernet
92
Advertisement
Table of Contents
