Figure 10-6 Storm Control Networking - Raisecom ISCOM2600G-HI (A) Series Configuration Manual

Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
To restrict impacts on Switch A caused by broadcast storm, you need to configure storm
control on Switch A to control broadcast packets from user networks 1 and 2, with the
threshold of 640 pps.

Figure 10-6 Storm control networking

Configuration steps
Enable storm control, and configure the threshold for storm control.
Raisecom(config)#interface gigaethernet 1/1/1
Raisecom(config-gigaethernet1/1/1)#storm-control broadcast bps 640
Raisecom(config-gigaethernet1/1/1)#exit
Raisecom(config)#interface gigaethernet 1/1/2
Raisecom(config-gigaethernet1/1/2)#storm-control broadcast bps 640
Checking results
Use the show storm-control command to show configurations of storm control.
Raisecom#show storm-control interface gigaethernet 1/1/1
Threshold: 0 kbps
Interface
-------------------------------------------------------------------------
------------
GE1/1/1
Packet-Type
Broadcast
Multicast --
Dlf --
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Pps(pps) Bps(Kbps)
-- 640
0
0
10 Security
Cbs(kByte)
4
0
0
430