Version
9.10(0.0)
9.9(0.0)
Usage Information You are guided through a series of queries to configure SupportAssist. The generated
commands are added to the running configuration, including the DNS resolve
commands, if configured.
This command starts the configuration wizard for the SupportAssist. At any time, you
can exit by entering Ctrl-C. If necessary, you can skip some data entry.
support-assist activity
Trigger an activity event immediately.
Syntax
support-assist activity {full-transfer} start now
Parameters
full-transfer
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
SupportAssist Commands
Dell Networking OS supports the following SupportAssist mode commands.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Enter the keywords full-transfer to specify transfer of
configuration, inventory, logs, and other information.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
SupportAssist
2137