Contact-Person - Dell C9000 Series Reference Manual

company-next-
name
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
Usage Information You can configure only one contact-company.
It is not possible to remove the components of the company name. The no form of the
command removes the entire contact-company entry.
This command is optional for SupportAssist service configuration.

contact-person

Configure the contact name for an individual.
Syntax
contact-person [first <first-name>] last <last-name>
To remove the contact person and all their details, use the no contact-person
[first <first-name>] last <last-name> command.
Parameters
first-name
last-name
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
(OPTIONAL) Enter the next components of the company name,
up to 5 components are allowed.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
(Optional) Enter the first name for the contact person. This is
optional provided each contact person name is unique. To
include a space, enter a space within double quotes.
Enter the last name for the contact person. To include a space,
enter a space within double quotes.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
SupportAssist 2139