Show Storm-Control Broadcast - Dell C9000 Series Reference Manual

• storm-control broadcast (Interface)
• storm-control multicast (Configuration)
• storm-control multicast (Interface)
• storm-control pfc-llfc
• storm-control unknown-unicast (Configuration)
• storm-control unknown-unicast (Interface)

show storm-control broadcast

Display the storm control broadcast configuration.
C9000 Series
Syntax
show storm-control broadcast [interface]
Parameters
interface
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.5.1.0
8.3.7.0
(OPTIONAL) Enter one of the following interfaces to display the
interface-specific storm control configuration:
•
•
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/ port information.
Storm Control 2124