Terminal Monitor - Dell C9000 Series Reference Manual

at : 24
1d 02:28:50:478591:qsfp-7 eeprom attempting to read on from iic
at : 23
1d 02:28:50:493790:qsfp-11 eeprom attempting to read on from iic
at : 18
1d 02:30:50:675435:qsfp-0 eeprom attempting to read on from iic
at : 17
1d 02:30:50:683019:qsfp-1 eeprom attempting to read on from iic
at : 16
Example ((PE
Dell#show logging kernellog stack-unit 1
Console)
00:00:32:342561:AXI unit 0: Dev 0xb340, Rev 0x01, Chip
BCM56340_A0, Driver BCM56340_A0

terminal monitor

Configure the system to display messages on the monitor/terminal.
C9000 Series
Syntax
terminal monitor
To return to default settings, use the terminal no monitor command.
defaults Disabled.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
Related logging monitor
Commands
• EXEC
• EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— sets the logging parameters on the monitor/terminal.
Simple Network Management Protocol (SNMP) and Syslog 2099