Forward-Delay - Dell C9000 Series Reference Manual

Version
8.3.7.0
7.7.1.0
7.5.1.0
6.2.1.1
Related protocol spanning-tree
Commands

forward-delay

The amount of time the interface waits in the Listening state and the Learning state before transitioning to the
Forwarding state.
C9000 Series
Syntax
forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command Modes SPANNING TREE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enters SPANNING TREE mode on the switch.
Enter the number of seconds the system waits before
transitioning STP to the Forwarding state. The range is from 4 to
30. The default is 15 seconds.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Spanning Tree Protocol (STP) 2112