local-file-name
Command Modes
SUPPORTASSIST ACTIVITY
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
Usage Information The remote file specification includes the protocol that is used to copy the file from the
remote system.
Related
Commands
action-manifest install
Configure the action-manifest to use for a specific activity.
Syntax
action-manifest install {default | <local-file-name>}
To revert to the default action-manifest file, use the action-manifest install
default command.
Parameters
default
local-file-name
Defaults
Default
Command Modes
SUPPORTASSIST ACTIVITY
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
•
Enter the name of the local action-manifest file, up to 32
characters long. Allowable characters are: a to z, A to Z, 0 to 9,
-, _, and space.
Description
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
•
action-manifest install
activity.
•
action-manifest show
•
action-manifest remove
Enter the keyword default to revert back to the default set of
actions for an activity.
Enter the name of the local action-manifest file. Allowable
characters are: a to z, A to Z, 0 to 9, -, _, and space.
scp://userid:password@hostip/filepath
— configure the action-manifest to use for a specific
— view the list of action-manifest for a specific activity.
— remove the action-manifest file for an activity.
SupportAssist
2142