Flash Memory Emulation In Ram - Renesas H8S/2633 Series Hardware Manual

22.4.5

Flash Memory Emulation in RAM

Emulation should be performed in user mode or user program mode. When the emulation block
set in RAMER is accessed while the emulation function is being executed, data written in the
overlap RAM is read.
SCI
Flash memory RAM
Emulation block
Overlap RAM
(emulation is performed
on data written in RAM)
Application program
Execution state
Figure 22-4 Reading Overlap RAM Data in User Mode or User Program Mode
When overlap RAM data is confirmed, the RAMS bit is cleared, RAM overlap is released, and
writes should actually be performed to the flash memory.
When the programming control program is transferred to RAM, ensure that the transfer destination
and the overlap RAM do not overlap, as this will cause data in the overlap RAM to be rewritten.
904