Reload Register (Iwdg_Rlr) - ST STM32L4x6 Reference Manual

Independent watchdog (IWDG)
32.4.3

Reload register (IWDG_RLR)

Address offset: 0x08
Reset value: 0x0000 0FFF (reset by Standby mode)
31 30 29
Res. Res. Res. Res.
15 14 13
Res. Res. Res. Res.
Bits 31:12 Reserved, must be kept at reset value.
Bits11:0 RL[11:0]: Watchdog counter reload value
These bits are write access protected see
define the value to be loaded in the watchdog counter each time the value 0xAAAA is written in
the IWDG_KR register. The watchdog counter counts down from this value. The timeout period
is a function of this value and the clock prescaler. Refer to the datasheet for the timeout
information.
The RVU bit in the IWDG_SR register must be reset in order to be able to change the reload
value.
Note: Reading this register returns the reload value from the VDD voltage domain. This value
1052/1693
28 27 26 25
Res. Res. Res.
12 11 10 9
rw rw rw
may not be up to date/valid if a write operation to this register is ongoing on this
register. For this reason the value read from this register is valid only when the RVU bit
in the IWDG_SR register is reset.
DocID024597 Rev 3
24 23 22 21
Res. Res. Res. Res.
8 7 6 5
RL[11:0]
rw rw rw rw
Section 32.3.6. They are written by software to
20 19 18 17
Res. Res. Res. Res.
4 3 2 1
rw rw rw rw
RM0351
16
Res.
0
rw