Display The Current-Configuration And Saved-Configuration Of Ethernet Switch; Save The Current-Configuration - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
1.2.2 Display the Current-configuration and Saved-configuration of Ethernet
Switch
After being powered on, the system will read the configuration files from Flash for the
initialization of the device. (Such configuration files are called saved-configuration files).
If there is no configuration file in Flash, the system will begin the initialization with the
default parameters.
during the operating process of the system is called current-configuration. You can use
the following commands to display the current-configuration and saved-configuration
information of the Ethernet switch.
Perform the following configuration in any view.
Table 1-5 Display the configurations of the Ethernet switch
Display
information of the Ethernet switch
Display
information of the Ethernet switch
Display the running configuration of the
current view
Note:
The configuration files are displayed in their corresponding saving formats.

1.2.3 Save the Current-configuration

Use the save command to save the current-configuration in the Flash Memory, and the
configurations will become the saved-configuration when the system is powered on for
the next time.
Perform the following configuration in user view.
Table 1-6 Save the current-configuration
Save the current-configuration
Relative to the saved-configuration, the configuration in effect
Operation
the saved-configuration
the current-configuration
Operation`
Huawei Technologies Proprietary
Chapter 1 File System Management
display saved-configuration
display
[ controller | interface interface-type
[ interface-number ] | configuration
[ configuration ] | vlan [ vlan-id ] ] [ |
{ begin |
regular-expression ]
display this
save [ file-name | safely ]
1-4
Command
current-configuration
exclude | include
Command
}