Esd Jack; System Configuration - Huawei Quidway S3700 Series Manual

Quidway S3700 Series Ethernet Switches
Hardware Description

5. ESD jack

1.4 ESD Jack
This section describes the functions of the ESD jack on the S3700.
The S3700 has an electromagnetic discharge (ESD) jack on the chassis.
When installing the S3700, wear an ESD wrist strap. Connect the ESD wrist strap to the ESD
jack on the chassis, as shown in
Figure 1-2 ESD jack

1.5 System Configuration

Table 1-4 System configuration
Item
Processor
Switching capacity
Packet forwarding
capacity
DDR memory
Flash Memory
Issue 02 (2011-11-21)
6. Fan module
NOTE
S3700-28TP-EI-MC-AC, S3700-28TP-SI-AC, S3700-28TP-SI-DC, S3700-28TP-EI-AC, S3700-28TP-
EI-DC, and S3700-28TP-EI-24S-AC do not have any ESD jack. The ESD jack of S3700-26C-HI is located
on the front side of the chassis; the ESD jacks of other models are located on the rear side of the chassis.
Parameter
S3700-26C-HI: 1GHz
S3700-28TP: 266 MHz
S3700-52P: 200 MHz
l S3700-28TP: 12.8 Gbit/s
l S3700-52P: 17.6 Gbit/s
l S3700-26C-HI: 12.4Gbit/s
l S3700-28TP: 9.6 Mpps
l S3700-52P: 13.1 Mpps
l S3700-26C-HI: 9.2Mpps
512M for S3700-26C-HI and 128 MB for others
64M for S3700-26C-HI and 16 MB for others
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7. Power supply unit slot
Figure 1-2.
1 Overview of the S3700
8. Two monitor interfaces
10