Chapter 1 Ntp Configuration Commands; Ntp Configuration Commands; Display Ntp-Service Sessions - Huawei Quidway S3900 series Command Manual

Command Manual – NTP
Quidway S3900 Series Ethernet Switches-Release 1510

Chapter 1 NTP Configuration Commands

Note:
To reduce the risk of being attacked by malicious users against opened socket and
enhance switch security, the S3900 series Ethernet switches provide the following
functions, so that a socket is opened only when it is needed:
Opening UDP port 123 (used for NTP) when NTP is enabled;
Close UDP port 123 when NTP is disabled.
The preceding functions are implemented as follows:
When you enable NTP by using the ntp-service unicast-server, ntp-service
unicast-peer, ntp-service broadcast-client, ntp-service broadcast-server,
ntp-service multicast-client, or ntp-service multicast-server command, UDP
port 123 is opened at the same time.
When you disable NTP from operating in any modes by using the undo forms of the
preceding six commands, UDP port 123 is closed at the same time.

1.1 NTP Configuration Commands

1.1.1 display ntp-service sessions

Syntax
display ntp-service sessions [ verbose ]
View
Any view
Parameter
verbose: Displays detailed NTP session information.
Description
Use the display ntp-service sessions command to display the information about all
the sessions maintained by local NTP service.
If you do not specify the verbose keyword, the brief information about all the sessions
is displayed.
Huawei Technologies Proprietary
1-1
Chapter 1 NTP Configuration Commands