System Time And Date - Dell S6100 Configuration Manual

The commands in this section configure time values on the system, either using the Dell Networking OS, or the hardware, or using the
network time protocol (NTP). With NTP, the switch can act only as a client to an NTP clock host.
For more information, see "Network Time Protocol" of the Management section in the Dell Networking OS Configuration Guide.
The commands in this chapter are generally supported on Dell Networking OS with some exceptions, as notes in the Command History
fields.
Topics:
• clock summer-time date
• clock summer-time recurring
• clock timezone
• debug ntp
• ntp authenticate
• ntp broadcast client
• ntp disable
• ntp multicast client
• ntp master <stratum>
• ntp offset-threshold
• ntp server
• ntp source
• ntp trusted-key
• ntp authentication-key
• show clock
• show ntp associations
• show ntp vrf associations
• show ntp status
clock summer-time date
Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.
Syntax clock summer-time time-zone date start-month start-day start-year start-time
end-month end-day end-year end-time [offset]
To delete a daylight saving time zone configuration, use the no clock summer-time command.
Parameters
time-zone
start-month

System Time and Date

Enter the three-letter name for the time zone. This name is displayed in the show clock
output.
Enter the name of one of the 12 months in English. You can enter the name of a day to
change the order of the display to time day month year.
54
System Time and Date 1599