Table of Contents
Advertisement
S2600E CLI Reference Guide
Chapter 7 SEM Configuration Commands
with CRC errors
input_errors_frame
packets received
input_errors_overrun
resource errors
input_packets_dropped
dropped from input Q
interface_resets
interface has been reset
output_buffer_failures
output_buffer_swappedout
swapped to DRAM
output_errors
on output
output_errors_underrun
output
output_packets_dropped
dropped from output Q
receive_broadcasts
packets received
receive_giants
packets received
receive_rate_bps
bits/sec
receive_rate_pps
pkts/sec
receive_runts
packets received
receive_throttle
was disabled
reliability
fraction of 255
rxload
of 255
transmit_rate_bps
bits/sec
transmit_rate_pps
pkts/sec
txload
of 255
Available events:
Number of framing ERR
Number of overruns and
Number of packets
Number of times an
Number of failed buffers
Number
of
packets
Number of packets errored
Number of underruns on
Number of packets
Number of broadcast
Number of too large
Interface receive rate in
Interface receive rate in
Number of too small
Number of times the receiver
Interface reliability as a
Receive rate as a fraction
Interface transmit rate in
Interface transmit rate in
Transmit rate as a fraction
Advertisement
Table of Contents
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?