Table of Contents
Advertisement
Chapter 1 Copy
Face Up/Down
If you are using the optional multifunction finisher or
stacking tray, you can specify whether to output
printouts face up or face down to the tray.
For more information, see the following pages:
• "Face Up/Down" (p. 8-21) when using the
optional multifunction finisher
• "Face Up/Down" (p. 8-25) when using the
optional stacking tray
Output Tray Relay
If you are using the optional multifunction finisher or
auto-control stacking tray, the output tray can
switch automatically when the tray that is being
used becomes full.
For more information, see the following pages:
• "Output Tray Relay" (p. 8-21) when using the
optional multifunction finisher
• "Output Tray Relay" (p. 8-25) when using the
optional auto-control stacking tray
Paper Tray Relay
Use this option to automatically feed paper from a
different tray with the same paper size and paper type
when the selected tray runs out of paper.
[OFF], [ON]
1
Touch [Paper Tray Relay].
The [Paper Tray Relay] screen is displayed.
2
Touch [ON].
3
Touch [OK].
Auto Image Rotation
This rotates the image 90 degrees automatically
when the orientations of the original and paper do
not match, even if the paper size loaded in the tray
matches the size of the loaded original. Normally,
this setting is set to [ON].
1-24
Interrupt Copy
This function allows you to pause the job being
printed to copy another document.
• The following functions are not available for
interrupt copy.
[Program], [Slip Sheet], [Add Cover], [ADF Scan
& Pause]
• The following functions are not available for
interrupt copy while a job is output to the
multifunction finisher.
[Staple / Punch], [Fold], [Binding], [Separating
Books], [Output Tray], [Face Up/Down], [Output
Tray Relay]
• The Interrupt Copy function is not available
while a job using staple function or offset output
function is being processed with the face down
finisher. The Interrupt Copy function is available
if the multifunction finisher or the stacking tray is
connected.
1
Press the [Interrupt] key.
The interruption screen is displayed.
2
Load the original and press the
[Start] key.
• You can continue with the interruption copying
while the [Ready to copy. (Interrupting)] message
is displayed.
3
After the copying is completed,
press the [Interrupt] key to cancel
interrupt copy.
Printing of the paused job resumes.
• Interrupt copy is also canceled when the machine
has not been operated for 60 seconds.
ComColor FW Series User's Guide
Advertisement
Table of Contents
