Paper jam occurs
If a paper jam occurs in the printer or paper is not fed, printing stops, the
tion will light up. In this case, remove the jammed paper and press the PRINTPAUSE Key, printing will resume.
Since this unit performs high speed printing, paper jams may occur at multiple locations. In this case, remove all the jammed paper.
If an optional HC Finisher is connected and a paper jam occurs in the Finisher (21 on the Operation Panel is lit), refer to "HC Finisher Main-
tenance Guide."
When removing jammed paper, take care not to leave pieces of paper inside the printer.
~ ~ ~ ~ Paper Jam Location
Details of the indicated locations are shown below. For detailed procedure, refer to the respective indicated page.
(1) Paper Jam in the Standard Paper Feed Tray
1
While pressing the Paper Release
Lever on the paper feed side to the
left, remove the paper.
JAM indicator, and the number indicating the jam loca-
Jam location
(1) Standard Paper Feed Tray
(2)On Transfer Roller
(3) Paper Receiving Section
(4) Right of Transfer Unit
(5) Duplex Transfer Unit
(6)(7)(8) Left of Transfer Unit
(17)(18)(19) Paper Feed Tray 1 or 2
(20) Transfer Unit
2
Press the CANCEL BACK Key.
The paper jam error is cleared.
Page referred to
)p.3-9
)p.3-10
)p.3-10
)p.3-11
)p.3-11
)p.3-13
)p.3-14
)p.3-15
3-9