Advertisement
Section 3:
Printing of Paper Originals
This section describes the procedure to scan and
print paper originals.
Step 1
Check that the power switch of
this machine is on.
Press the upper side of the power switch.
When an authentication screen is
displayed, follow the instructions on
the screen.
Step 2
Check that the master making
basic screen is displayed.
If a screen other than the master making basic
screen is displayed, press the [MASTER
MAKING] key.
Step 3
Place the original.
The size of the placed original on
the optional auto document feeder
is displayed next to [Page] in the
master making basic screen. If the
displayed size is different from the
size of the placed original, place the
original again.
Page 7
Step 4
Check if the paper on the paper
feed tray is ready.
Step 5
Check if the paper receiving tray is
ready.
Step 6
Check the [Auto Process] setting.
Step 7
Set the master making conditions.
Step 8
Enter the number of copies to be
printed using the numeric keys.
Step 9
Press the [START] key.
Master making starts and a proof copy is
output.
When the [Auto Process] setting is on, go to
step 12.
When the [Auto Process] setting is off, go to
step 10.
The size of the placed paper is
displayed in [Paper] in the master
making basic screen. If the
displayed size is different from the
size of the placed paper, place the
paper again.
The position of the paper-feed
setting lever is displayed as an icon
next to [Paper] in the master making
basic screen.
When you place originals on the
optional auto document feeder,
[Auto Process] turns on
automatically.
You can change the default setting
in [ADF Auto Process] under
[Admin.].
An idling action (to ensure the ink
usability and stability) may be
automatically executed. You can
change the setting in [Auto Idling]
under [Admin.].
Advertisement
