Paper Feed/Output Settings For Special Paper And Printing Types [Eject Wing Control] [Special Paper Ctrl] - Riso MZ970 User Manual

Functions for Printing
Paper Feed/Output Settings for Special
Paper and Printing Types
[Eject Wing Control] [Special Paper Ctrl]
Paper feed and output settings can be adjusted when using special paper or uneven print finishes.
Eject Wing Control
The following steps retrieves pre-configured custom settings for
the Paper Ejection Wing. Use this feature to eject certain printing
paper that is hard to eject with automatically adjusted normal
Paper Ejection Wing setting.
Important!:
• "Eject Wing Control" feature is not available unless pre-config-
ured.
• Only one setting can be pre-configured.
• To pre-configure or to change settings, please contact your dealer (or authorised service representative).
Note:
• The Paper Ejection Wing is a device which helps eject printed paper onto the Auto-control Stacking Tray or the
Paper Receiving Tray.
It automatically adjusts according to the position of the Paper Feed Pressure Adjustment Lever (standard or
thick).
Special Paper Ctrl
You can save settings for easy retrieval next time. The "Special Paper Ctrl" menu contains the following options:
Paper Feed Adj.
Adjust Standard Feed Tray position and paper-feed amount to suit special paper characteristics.
For adjustment methods, please contact your dealer (or authorised service representative).
Paper Eject Adj
Some types of original image/paper may be printed with an uneven or blurred finish due to air blow or separation
fan settings. This option can be used to change air blow, separation fan settings.
For adjustment methods, please contact your dealer (or authorised service representative).
122

Paper Feed/Output Settings for Special Paper and Printing Types [Eject Wing Control] [Special Paper Ctrl]

Paper Ejection Wing