Removing The Elevator Upper-Limit Sensors And Paper Feed Pressure Sensor - Riso RZ9 Series Technical Manual

6. Removing the Elevator Upper-limit Sensors and Paper Feed Pressure Sensor

(1) Lower the paper feed tray to the lower-limit position, then switch off power.
(2) Remove the paper feed cover.
(3) Remove the first paper feed stay assembly.
Removing the elevator upper-limit sensors
(4) Unplug the connectors and dismount the elevator upper-limit sensors.
Removing the paper feed pressure sensor
(4) Set the paper feed pressure lever to the <Normal> position.
(5) Unplug the connector and dismount the paper feed pressure sensor.
0444
<Normal>
position
Paper feed pressure sensor
DANKA AUSTRALIA PTY. LTD.
Elevator upper-limit
sensor B
Paper feed pressure lever
[ 4 - 23 ] - Rev. 0.2
CHAPTER 4: FIRST PAPER FEED SECTION
0441
Elevator upper-limit
sensor A
0445
RZ9 Series