System:communicate:lan[:Self]:Configure; System:communicate:lan[:Self]:Control; System:communicate:lan[:Self]:Current:address; System:communicate:lan[:Self]:Current:dgateway - Keysight E4980AL User Manual

SCPI Command Reference
E4980A/AL commands

:SYSTem:COMMunicate:LAN[:SELF]:CONFigure

Syntax
:SYSTem:COMMunicate:LAN[:SELF]:CONFigure {AUTO|MANual}
:SYSTem:COMMunicate:LAN[:SELF]:CONFigure?
Description Selects automatic obtaining or manual setting for the IP address obtaining
method.
This command is available for the firmware revision 2.00 or later.
Parameter
AUTO (Preset value)
MANual
Equivalent key [System] - SYSTEM CONFIG - IP CONFIG - AUTO
[System] - SYSTEM CONFIG - IP CONFIG - MAN

:SYSTem:COMMunicate:LAN[:SELF]:CONTrol

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CONTrol
Description Returns the SOCKET control port number. If the parser is a SOCKET, it will
return a number from 5000 to 5100. Otherwise, 0. (Query Only)
Equivalent key No equivalent key is available on the front panel.

:SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?
Description Returns the current IP address. (Query Only)
Equivalent key No equivalent key is available on the front panel.

:SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Description Returns the current Gateway address. (Query Only)
Equivalent key No equivalent key is available on the front panel.
372
Description
Sets the IP address obtaining method to AUTO
Sets the IP address obtaining method to MAN
Keysight E4980A/AL Precision LCR Meter