Command Reference
E4981A SCPI Commands
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:DGATeway?
Description
Returns the current Gateway address. (Query Only)
Query response
{"string"}<newline><^END>
Equivalent key
No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk?
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:CURRent:SMASk?
Description
Returns the current Subnet Mask. (Query Only)
Query response
{"string"}<newline><^END>
Equivalent key
No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway <String>
:SYSTem:COMMunicate:LAN[:SELF]:DGATeway?
Description
Sets the static Gateway address.
Parameter
Initial (Factory set) value
The value of this command is not changed with
and is only changed with Factory Default reset (available only through
Front Panel).
{"string"}<newline><^END>
Query response
Equivalent key
[System] - SYSTEM CONFIG - MANUAL GATEWAY - ENTER
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
<String>
"0.0.0.0"
*RST
and
:SYSTem:PRESet
277