System:communicate:lan[:Self]:Configure; System:communicate:lan[:Self]:Control; System:communicate:lan[:Self]:Current:address - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:SYSTem:COMMunicate:LAN[:SELF]:CONFigure

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CONFigure {AUTO|MANual}
:SYSTem:COMMunicate:LAN[:SELF]:CONFigure?
Description Sets the IP configuration setup method i.e. Auto/Manual.
Parameters
AUTO (Initial [Factory set]
value)
MANual
The value of this command is not changed with
and is only changed with Factory Default reset (available only through
Front Panel).
{AUTO|MAN}<newline><^END>
Query response
Equivalent key [System] - SYSTEM CONFIG - IP CONFIG - AUTO|MANUAL
sequence

:SYSTem:COMMunicate:LAN[:SELF]:CONTrol?

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CONTrol?
Description Returns the SOCKET control port number. If the parser is a SOCKET, it will
return a number from 5000 to 5100. Otherwise, 0. (Query Only)
Query response {numeric}<newline><^END>
Equivalent key No equivalent key is available on the front panel.

:SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?

Syntax :SYSTem:COMMunicate:LAN[:SELF]:CURRent:ADDRess?
Description Returns the current IP address. (Query Only)
Query response {"string"}<newline><^END>
Equivalent key No equivalent key is available on the front panel.
276
Description
Sets the IP configuration setup to auto mode.
Sets the IP configuration setup to manual mode.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
and
*RST :SYSTem:PRESet