Capacitance Measurement - Keysight U1701B Operating Instructions Manual

Capacitance Measurement

Procedure:
1 Press
2 To test for capacitance, keep an open circuit on
3 Insert the capacitor legs into + and – input
4 Remove your hands from capacitor to allow it
5 Read the measurement on the display.
To avoid possible damage to the meter or the
CAUTION
equipment under test, disconnect circuit power and
discharge the capacitor before measuring
capacitance.
4
to power-on the meter.
the test leads and press
residual capacitance of the meter and leads.
terminals respectively. Ensure that the polarity
of the capacitor's leg are correct.
to be tested.
to subtract the
Keysight U1701B Quick Start Guide