Display Setting For Measurement Results - Keysight E4980A User Manual

Precision lcr meter

Hide thumbs Also See for E4980A:

Table of Contents

Display Format

MEAS DISPLAY Page

Display Setting for Measurement Results

The E4980A/AL can set the display digits and display units for measurement

results (primary parameter/secondary parameter). For measurement

parameters whose "setting available?" column is No in

setting cannot be changed. For measurement parameters whose display digit

can be set to AUTO or FIXED, generally AUTO is selected. Regarding the

display range for measurement values, refer to "Measurement display ranges"

in data sheet in

Under certain conditions, a message will be displayed instead of measurement

results. For details, refer to

Results" on page 71

Display Settings for Measurement Results

Procedure to change display setting

Step 1. Press the [Display Format] key.

Step 2. Press the MEAS DISPLAY softkey.

Step 3. Use the cursor keys to select the field in which a measurement result of

primary parameter or secondary parameter is displayed.

Step 4. Use the following softkeys to set the display.

Keysight E4980A/AL Precision LCR Meter

Chapter 11 "Specifications and Supplemental Information"

shows the digits and units that can be set for each measurement

"Displaying Errors instead of Measurement

Supplementary unit

a,f,p,n,u,m,k,M,G,T,P,E

3-22, the display

E4980aal E4980al