B.2 Changes Between Rev. 1 And Rev. 2 - Freescale Semiconductor MCF5329 Reference Manual

Table B-1. MCF5329RM Rev 2 to Rev. 3 Changes (continued)
Chapter
Debug Module Added CSR[1:0] bits.
Added note to CSR[PCD] bit description.
Rearranged sections
JTAG Changed reset value of IDCODE[DC] to see note, and added note that this value varies, depending on design
center location.
Memory Map Corrected PWM base memory map from 0xFC09_000 to 0xFC09_0020
B.2 Changes Between Rev. 1 and Rev. 2
Chapter
Overview Added MCF53281 device to family configuration table.
Added VoIP system solution to features list and added VoIP section.
Signal Table 2-1/Page 2-2: Change D[31:0] signal direction from output (O) to input/output (I/O).
Descriptions
Table 2-1/Page 2-2: Change MCF5327 196 MAPBGA ball locations for the following signals:
Table 2-10/Page 2-13: Change LCD_SCLK to LCD_LSCLK to be consistent with the rest of the reference
manual.
Table 2-16/Page 2-17: Change USBOTG_PU_EN to an output and change the description to the following:
Enables an external pull-up on the USBOTG_DP line. This signal is controlled by the UOCSR[BVLD] bit.
Freescale Semiconductor
Table B-2. MCF5329RM Rev 1 to Rev. 2 Changes
Signal Name
Old Incorrect Location
RCON
D1
D0
OE
R/W
SD_DQS2
PSTCLK
DDATA[3:0] P7, L8, M8, N8
PST[3:0] P8, L9, M9, N9
EVDD E6, E7, F5–F7, H9, J9, J9, K8,
IVDD E5, K5, K10
SD_VDD E8, E9, F8–F10, J6, K6, J7, K7
MCF5329 Reference Manual, Rev 3
Description
Description
MCF5327 196 MAPBGA
New Correct Location
N7
M6
N6
L7
P6
L6
M7
N7, P7, L8, M8
N8, P8, L9, M9
E6, E7, F5–F7, H9, J9, J9, K8,
K9
E5, K5, K10, J10
E8, E9, F8–F10, J5–J7, K7
Revision History
M7
L6
M6
P6
N6
K6
L7
K9, K11
B-5