Freescale Semiconductor MCF5329 Reference Manual page 920

Revision History
Table B-4. MCF5329RM Rev. 0 to Rev. 0.1 Changes (continued)
Location
Section 2.3
Section 2.3
Table 2-18/Page 2-15
Table 2-19/Page 2-15
B-18
The LCD controller signals section is missing. Insert the following section & table:
2.3.8 LCD Controller Signals
Table 23-9 describes the LCD controller signals.
Signal Name Abbreviation
Line Data LCD_D[17:0]
First Line Marker/ LCD_FLM/
Vertical Sync LCD_VSYNC
Line Pulse/ LCD_LP/
Horizontal Sync LCD_HSYNC
Shift Clock LCD_SCLK
Alt. Crystal LCD_ACD/
Direction/ LCD_OE
Output Enable
Contrast LCD_CONTRAST Controls the LCD bias voltage for contrast control.
Power Save LCD_PS
Gate Driver Clock LCD_CLS
Signal
Reverse Control LCD_REV
Sampling Start LCD_SPL_SPR
Signal
The FlexCAN signals section is missing. Insert the following section & table:
2.3.11 FlexCAN Signals
Table 23-13 describes the FlexCAN module signals.
Signal Name Abbreviation
FlexCAN Transmit CANTX
FlexCAN Receive CANRX
Remove sentence "Only present on the MCF5372 and MCF5373 devices." from the Debug Data
and Processor Status Outputs entries.
Remove "All Processor Status Outputs" entry row because the ALLPST signal is not present.
Remove "ALLPST" column in table as well as "(MCF5372 & MCF5373)" in the PST[3:0] column
heading.
MCF5329 Reference Manual, Rev 3
Description
Table 23-9. LCD Signals
Function
LCD data bus.
Passive matrix: First line marker
Active matrix: Vertical sync pulse. Indicates start of next frame.
Passive matrix: Line pulse
Active matrix: Horizontal sync pulse. Indicates start of next line.
Clock for latching data into the display driver's internal shift
register.
Passive matrix: Alternate crystal direction
Active matrix: Output enable to enable data to be shifted onto
the display.
Controls signal output for source driver (Sharp HR-TFT
240x320 panels only)
Start signal output for gate driver, inverted version of LCD_PS
(Sharp HR-TFT 240x320 panels only).
Signal for common electrode driving signal preparation (Sharp
HR-TFT 240x320 panels only).
Sets the horizontal scan direction (Sharp HR-TFT 240x320
panels only).
Table 23-13 FlexCAN Signals
Function
Controller area network transmit data output.
Controller area network receive data input.
I/O
O
O
O
O
O
O
O
O
O
O
I/O
O
I
Freescale Semiconductor