Ip Ssh Password-Authentication - Dell C9000 Series Reference Manual

ip ssh password-authentication

Enable password authentication for the SSH server.
C9000 Series
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-
authentication enable command.
Parameters
enable
Defaults Enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information With password authentication enabled, you can authenticate using the local, RADIUS,
or TACACS+ password fallback order as configured.
Enter the keyword enable to enable password-authentication
for the SSH server.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820t.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Security 1989