Dot1X Reauth-Max - Dell Z9500 Reference Manual

To disable periodic reauthentication, use the no dot1x reauthentication
command.
Parameters
interval
seconds
Defaults 3600 seconds (1 hour)
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.4.1.0

dot1x reauth-max

Configure the maximum number of times a port can reauthenticate before the port becomes
unauthorized.
Z9500
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number
Defaults 2
Command INTERFACE
Modes
194
(Optional) Enter the keyword interval then the interval
time, in seconds, after which reauthentication is initiated.
The range is from 1 to 31536000 (one year). The default is
3600 (1 hour).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
Enter the permitted number of reauthentications. The range
is from 1 to 10. The default is 2.
802.1X