Table 14: Show Cpm Ip Filter Output Fields - Alcatel-Lucent 7450 System Management Manual
Ethernet service switch
Hide thumbs
Also See for 7450:
- Quality of service manual (912 pages) ,
- Manual (816 pages) ,
- Configuration manual (778 pages)
Table of Contents
Advertisement
Security Commands
ip-filter
Syntax
ip-filter [entry entry-id]
Context
show>system>security>cpm-filter
Description
This command displays CPM IP filters.
Parameters
entry entry-id — Identifies a CPM filter entry as configured on this system.
Output
CPM Filter Output — The following table describes CPM IP filter output fields..
Table 14: Show CPM IP Filter Output Fields
Page 236
Values
1 — 2048
Label
Entry-Id
Dropped
Forwarded
Description
Log ID
Src IP
Dest. IP
Src Port
Dest. Port
Protocol
Dscp
Fragment
ICMP Type
ICMP Code
TCP-syn
TCP-ack
Match action
Next Hop
Displays information about the specified management access filter
entry
Displays the number of dropped events.
Displays the number of forwarded events.
Displays the CPM filter description.
Displays the log ID where matched packets will be logged.
Displays the source IP address(/netmask or prefix-list)
Displays the destination IP address(/netmask).
Displays the source port number (range).
Displays the destination port number (range).
Displays the Protocol field in the IP header.
Displays the DSCP field in the IP header.
Displays the 3-bit fragment flags or 13-bit fragment offset field.
Displays the ICMP type field in the ICMP header.
Displays the ICMP code field in the ICMP header.
Displays the SYN flag in the TCP header.
Displays the ACK flag in the TCP header
When the criteria matches, displays drop or forward packet.
In case match action is forward, indicates destination of the matched
packet.
7450 ESS System Mangement Guide
Description
Advertisement
Table of Contents
