Table 7: Service Ingress Qos Policy Ip Match Criteria; Table 8: Service Ingress Qos Policy Mac Match Criteria; Table 9: Mac Match Ethernet Frame Types; Table 10: Mac Match Criteria Frame Type Dependencies - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Table 7: Service Ingress QoS Policy IP Match Criteria

• DSCP value

Table 8: Service Ingress QoS Policy MAC Match Criteria

• IEEE 802.1p value/mask
• Source MAC address/mask
• Destination MAC address/mask
• EtherType value
The MAC match criteria that can be used for an Ethernet frame depends on the frame's format.
Note that 7210 SAS E does not support configuring of the frame-type match criteria. See

Table 9: MAC Match Ethernet Frame Types

Frame Format
802dot3
802dot2-llc
802dot2-snap
Ethernet-II
Table 10

Table 10: MAC Match Criteria Frame Type Dependencies

Frame Format
802dot3
802dot2-llc
7210 SAS E OS Quality of Service Guide
IP Criteria
MAC Criteria
IEEE 802.3 Ethernet frame. Only the source MAC, destination MAC and
IEEE 802.1p value are compared for match criteria.
IEEE 802.3 Ethernet frame with an 802.2 LLC header. Only the source
MAC and destination MAC address are compared for match criteria.
IEEE 802.2 Ethernet frame with 802.2 SNAP header. Only the source MAC
and destination MAC address are compared for match criteria.
Ethernet type II frame where the 802.3 length field is used as an Ethernet
type (Etype) value. Etype values are two byte values greater than 0x5FF
(1535 decimal).
lists the criteria that can be matched for the various MAC frame types.
Source MAC
Yes
Yes
Description
Dest MAC IEEE 802.1p Value
Yes
Yes
QoS Policies
Table
Etype Value
Yes No
Yes No
Page 39
9.