Show Commands - Alcatel-Lucent 7450 Basic System Configuration Manual

Description This command enables the context to configure management interface parameters.
Default
No default
Parameters
cli — Allows configuration of parameters related to basic CLI commands for datastore
configuration
Syntax configuration
Context config>system>management
Description This command enables the context to configure parameters related to configuration data.
immediate
Syntax [no] immediate
Context config>system>management>configuration
Description
This command enables writeable access in the configure CLI branch.
The no form of this command, when configured under the management cli context, blocks writeable
access and configuration changes in the configure CLI branch. This causes the running configuration
datastore from the configure CLI branch to be read-only.
This command can be used to enforce the use of candidate configuration and the commit command,
instead of allowing immediate mode line-by-line configuration changes.
Default immediate (configuration changes are allowed in the configure CLI branch)

Show Commands

The following command outputs are examples only; actual displays may differ depending on
supported functionality and user configuration.
alias
Syntax alias
Context <root>
Description This command displays a list of existing aliases.
Basic System Configuration Guide
infrastructure operation and behavior.
CLI Usage
167