Set The Time, Date, And Time Zone; Copy Files To The Server - Avaya S8300 Series Replacement Manual

Set the time, date, and time zone

To set the time, date, and time zone on the server:
1. On the Server (Maintenance) Web page select Server > Server Date/Time.
The system displays the Server Date/Time screen.
2. Set the server time within five (5) minutes of the Network Timer Server (NTS) time, date and
time zone so that synchronization can occur.

Copy files to the server

While reformatting the hard drive a new directory, /var/home/ftp/pub, was created. You must
copy these files to the pub directory on the server's hard drive:
Communication Manager software service pack
●
License file
●
Avaya authentication file
●
Media Gateway firmware, Media Module firmware, IP telephony firmware files
●
Security updates
●
Messaging application service packs, RFUs, announcement files, or language sets
●
To copy files to the server:
1. On the Server (Maintenance) Web page select Miscellaneous > Download Files.
The system displays the Download Files screen.
2. Select File(s) to download from the machine I'm using to connect to the server.
3. Click Browse to open the Choose File window to navigate to the files you want to
download.
4. Select the file(s) to download.
Note:
If you need to download an IP telephone firmware file, download this file last with
Note:
the "Install this file on the local server" checked. The files are copied to the
.../tftpboot directory, the IP telephone Web page is reinstated, and the firmware
restored at the next reboot.
Note:
To manually FTP files from your laptop to /var/home/ftp/pub, you must change the
Note:
directory to pub (type cd pub) after starting FTP and logging in.
Set the time, date, and time zone
03-300528 Issue 6 May 2009 29