Quanta Computer QuantaMesh User Manual page 1009

UANTA COMPUTER INC.
9.5.2.5 username
The command identifies the switch's account name on the vCenter server. The switch uses this user
name to access vCenter information.
Syntax
username <name>
<name> - vCenter account username. Parameter must match the username configured on the
vCenter.
Default Setting
None
Command Mode
VM Tracer Config
9.5.2.6 url
The command specifies the vCenter server location that is monitored by the session being edited by the
current vmtracer mode. The command must reference a fully formed secure url.
Syntax
url <url_name>
<url_name> - the location value of the vCenter server. Valid formats include IP address (dotted
decimal notation) and fully qualified domain name.
Default Setting
None
Command Mode
VM Tracer Config
QuantaMesh | Data Center Bridging Commands
Layer 2/3/4 Managed Switch
1009