Ip Irdp Address; Ip Irdp Holdtime - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

ip irdp address

This command configures the address that the interface uses to send the router discovery
advertisements. The valid values for <ipaddr> are 224.0.0.1, which is the all-hosts IP multicast
address, and 255.255.255.255, which is the limited broadcast address.
Default 224.0.0.1
Format
ip irdp address <ipaddr>
Mode Interface Config
no ip irdp address
This command configures the default address used to advertise the router for the interface.
Format
no ip irdp address
Mode Interface Config

ip irdp holdtime

This command configures the value, in seconds, of the holdtime field of the router advertisement
sent from this interface. The holdtime range is the value of <maxadvertinterval> to 9000
seconds.
Default 3 * maxinterval
Format
ip irdp holdtime <maxadvertinterval-9000>
Mode Interface Config
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format
no ip irdp holdtime
Mode Interface Config
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-21