Show Interface Ethernet - NETGEAR M6100 Series Reference Manual

0/5
...
...
ch1
ch2
...
ch64
CPU 4025293

show interface ethernet

This command displays detailed statistics for a specific interface or for all CPU traffic based
upon the argument.
Format
show interface ethernet {unit/slot/port | switchport | all}
Mode Privileged EXEC
When you specify a value for unit/slot/port, the command displays the following
information.
Term Definition
Packets Received Total Packets Received (Octets) - The total number of octets of data (including those in bad
packets) received on the network (excluding framing bits but including Frame Check Sequence
(FCS) octets). This object can be used as a reasonable estimate of Ethernet utilization. If greater
precision is desired, the etherStatsPkts and etherStatsOctets objects should be sampled before and
after a common interval. The result of this equation is the value Utilization which is the percent
utilization of the Ethernet segment on a scale of 0 to 100 percent.
Packets Received 64 Octets - The total number of packets (including bad packets) received that
were 64 octets in length (excluding framing bits but including FCS octets).
Packets Received 65–127 Octets - The total number of packets (including bad packets) received
that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 128–255 Octets - The total number of packets (including bad packets) received
that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 256–511 Octets - The total number of packets (including bad packets) received
that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 512–1023 Octets - The total number of packets (including bad packets)
received that were between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Received 1024–1518 Octets - The total number of packets (including bad packets)
received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
Packets Received > 1518 Octets - The total number of packets received that were longer than
1522 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
M6100 Series Switches
0
Utility Commands
157
32910 120