NETGEAR M6100 Series Reference Manual page 20

Table 6. CLI Mode Access and Exit (continued)
Command Mode Access Method
Interface Config From the Global Config mode, enter:
interface unit/slot/port
From the Global Config mode, enter:
interface loopback id
From the Global Config mode, enter:
interface tunnel id
From the Global Config mode, enter:
interface
unit/slot/port(startrange)-
unit/slot/port(endrange)
From the Global Config mode, enter:
interface lag lag-intf-num
From the Global Config mode, enter:
interface vlan vlan-id
Line Console From the Global Config mode, enter
line console.
Line SSH From the Global Config mode, enter
line ssh.
Line Telnet From the Global Config mode, enter
line telnet.
AAA IAS User From the Global Config mode, enter
Config
aaa ias-user username name.
Mail Server Config From the Global Config mode, enter
mail-server address.
Policy-Map From the Global Config mode, enter
Config
policy-map.
Policy-Class-Map From the Policy Map mode enter class. To exit to the Policy Map mode, enter exit. To
Config
Class-Map From the Global Config mode, enter
Config class-map, and specify the optional
keyword ipv4 to specify the Layer 3
protocol for this class. See
page 1005 for more information.
M6100 Series Switches
class-map
NETGEAR Managed Switch Software Modules
20
Exit or Access Previous Mode
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
on