Configuration Scripting Commands; Show Tacacs Source-Interface - NETGEAR M6100 Series Reference Manual

Term Definition
TimeOut The timeout in seconds for establishing a TCP connection.
Priority The preference order in which TACACS+ servers are contacted. If a server connection fails, the next
highest priority server is contacted.

show tacacs source-interface

Use the show tacacs source-interface command in Global Config mode to display
the configured global source interface details used for a TACACS+ client. The IP address of
the selected interface is used as source IP for all communications with the server.
Format
show tacacs source-interface
Mode Privileged EXEC
Command example:
(Config)# show tacacs source-interface
TACACS Client Source Interface
TACACS Client Source IPv4 Address

Configuration Scripting Commands

Configuration Scripting allows you to generate text-formatted script files representing the
current configuration of a system. You can upload these configuration script files to a PC or
UNIX system and edit them. Then, you can download the edited files to the system and apply
the new configuration. You can apply configuration scripts to one or more switches with no or
minor modifications.
Use the show running-config command (see
capture the running configuration into a script. Use the copy command (see
page 202) to transfer the configuration script to or from the switch.
Use the show command to view the configuration stored in the startup-config, backup-config,
or factory-defaults file (see
You should use scripts on systems with default configuration; however, you are not prevented
from applying scripts on systems with non-default configurations.
Scripts must conform to the following rules:
• Script files are not distributed across the chassis, and remain only in the blade that is the
supervisor blade at the time of the file download.
• The file extension must be ".scr".
• A maximum of ten scripts are allowed on the switch.
• The combined size of all script files on the switch shall not exceed 2048 KB.
M6100 Series Switches
: loopback 0
: 1.1.1.1 [UP]
show (Privileged EXEC)
Management Commands
138
show running-config on page 171) to
on page 173).
copy on