Note:
Changing the time-out value for active sessions does not become
effective until the session is accessed again. Also, any keystroke
activates the new time-out duration.
Format
no telnetcon timeout
Mode
Privileged EXEC
show telnet
This command displays the current outbound Telnet settings. In other words, these settings
apply to Telnet connections initiated from the switch to a remote system.
Format
show telnet
Modes
•
Privileged EXEC
•
User EXEC
Term
Definition
Outbound Telnet
The number of minutes an outbound Telnet session is allowed to remain inactive before being
Login Timeout
logged off.
Maximum Number
The number of simultaneous outbound Telnet connections allowed.
of Outbound Telnet
Sessions
Allow New
Indicates whether outbound Telnet sessions will be allowed.
Outbound Telnet
Sessions
show telnetcon
This command displays the current inbound Telnet settings. In other words, these settings
apply to Telnet connections initiated from a remote system to the switch.
Format
show telnetcon
Modes
•
Privileged EXEC
•
User EXEC
Term
Remote Connection Login
Timeout (minutes)
M6100 Series Switches
Definition
This object indicates the number of minutes a remote connection session is allowed to remain
inactive before being logged off. May be specified as a number from 1 to 160. The factory
default is 5.
Management Commands
60