Show Backplane; Show Backplane-Port Diag; Show Backplane-Port Packet-Path; Chassis Firmware Synchronization Commands - NETGEAR M6100 Series Reference Manual

Term Definition
Tx Total Errors Platform-specific number of total transmit errors since power-up.
Rx Data Rate Receive data rate in megabits per second on the backplane port.
Rx Error Rate Platform-specific number of receive errors per second.
Rx Total Errors Platform-specific number of total receive errors since power-up.
Link Flaps The number of times this backplane port transitioned to the down state.

show backplane-port diag

This command shows backplane port diagnostics for each port and is only intended for Field
Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this
command and capture this information.
Format
show backplane-port diag [<1-3> | all] [verbose]
Mode Privileged EXEC

show backplane-port packet-path

This command displays the route a packet will take to reach the destination.
Format
show backplane-port packet-path {1-3 | all}
Mode Privileged EXEC

show backplane

This command displays the backplane model ID, FAPGA version, and serial number.
Format
show backplane
Mode Privileged EXEC

Chassis Firmware Synchronization Commands

Chassis Firmware Synchronization (CFS) provides the ability to automatically synchronize
firmware for all chassis members. If a blade joins the chassis and its firmware version is
different from the version running on the chassis manager, the CFS feature can either
upgrade or downgrade the firmware on the mismatched chassis member. There is no attempt
to synchronize the blade to the latest firmware in the chassis.
M6100 Series Switches
Chassis Commands
37