NETGEAR M6100 Series Reference Manual page 21

Table 6. CLI Mode Access and Exit (continued)
Command Mode Access Method
VPC From Global Config mode, enter vpc.
Ipv6-Class-Map From the Global Config mode, enter
Config class-map and specify the optional
keyword ipv6 to specify the Layer 3
protocol for this class. See
page 1005 for more information.
Router OSPF From the Global Config mode, enter
Config
router ospf.
Router OSPFv3 From the Global Config mode, enter
Config
ipv6 router ospf.
Router RIP From the Global Config mode, enter
Config
router rip.
BGP Router From the Global Config mode, enter
Config
router bgp asnumber.
Route Map Config From the Global Config mode, enter
route-map map-tag.
IPv6 Address From the BGP Router Config mode,
Family Config enter address-family ipv6.
Peer Template From the BGP Router Config mode,
Config enter template peer name to create
a BGP peer template and enter Peer
Template Configuration mode.
MAC Access-list From the Global Config mode, enter
Config
mac access-list extended name.
TACACS Config From the Global Config mode, enter
tacacs-server host ip-addr,
where ip-addr is the IP address of the
TACACS server on your network.
DHCP Pool From the Global Config mode, enter
Config
ip dhcp pool pool-name.
DHCPv6 Pool From the Global Config mode, enter
Config
ip dhcpv6 pool pool-name.
M6100 Series Switches
class-map
NETGEAR Managed Switch Software Modules
21
Exit or Access Previous Mode
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
on
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
o exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit.
To return to the Privileged EXEC mode, enter
Ctrl-Z.