-
Filter displayed output to exclude lines containing a specified string match.
-
Filter displayed output to only include lines including and following a specified
string match.
-
Filter displayed output to only include a specified section of the content (for
example, "interface 0/1") with a configurable end-of-section delimiter.
-
String matching should be case insensitive.
-
Pagination, when enabled, also applies to filtered output.
The following shows an example of the extensions made to the CLI show commands for
the Output Filtering feature.
(NETGEAR Switch) #show running-config ?
<cr>
|
<scriptname>
all
interface
(NETGEAR Switch) #show running-config | ?
begin
exclude
include
section
For new commands for the feature, see
M6100 Series Switches
Press enter to execute the command.
Output filter options.
Script file name for writing active configuration.
Show all the running configuration on the switch.
Display the running configuration for specificed interface
on the switch.
Begin with the line that matches
Exclude lines that matches
Include lines that matches
Display portion of lines
CLI Output Filtering Commands
Using the Command-Line Interface
15
on page 147.