Prelogin Banner, System Prompt, And Host Name Commands; Script Validate; Script List; Script Show - NETGEAR M6100 Series Reference Manual

script list

This command lists all scripts present on the switch as well as the remaining available space.
Format
script list
Mode Privileged EXEC
Term
Configuration Script Name of the script.
Size

script show

This command displays the contents of a script file, which you specify with the scriptname
argument.
Format
script show scriptname
Mode Privileged EXEC
Term Definition
Output Format line number: line contents

script validate

This command validates a script file by parsing each line in the script file, in which
scriptname is the name of the script to validate.The validate option is intended to be used
as a tool for script development. Validation identifies potential problems. It might not identify
all problems with a given script on any given device.
Format
script validate scriptname
Mode Privileged EXEC
Prelogin Banner, System Prompt, and Host Name
Commands
This section describes the commands you use to configure the prelogin banner and the
system prompt. The prelogin banner is the text that displays before you login at the
prompt.

copy (pre-login banner)

The copy command includes the option to upload or download the CLI Banner to or from the
switch. You can specify local URLs by using FTP, TFTP, SFTP, SCP, or Xmodem.
M6100 Series Switches
Definition
Privileged EXEC
Management Commands
140
User: