Show Backplane-Port; Show Backplane-Port Counters; Backplane Port Commands - NETGEAR M6100 Series Reference Manual

If you supply a value for switchindex, the following output appears:
Term Definition
Switch Type The 32-bit numeric switch type for the supported blade.
Model Identifier The model identifier for the supported blade type.
Switch Description The description for the supported blade type.

Backplane Port Commands

This section describes the commands you use to view and configure backplane port
information.

show backplane-port

This command displays summary backplane-port information for all interfaces.
Format
show backplane-port
Mode Privileged EXEC
For each Interface:
Term Definition
Unit The blade number.
Interface The blade and port numbers.
Link Status Status of the link.
Link Speed Speed (Gbps) of the blade port link.

show backplane-port counters

This command displays summary data counter information for all interfaces.
Format
show backplane-port counters
Mode Privileged EXEC
Term Definition
Unit The slot number.
Interface The slot and port numbers.
Tx Data Rate Trashing data rate in megabits per second on the backplane port.
Tx Error Rate Platform-specific number of transmit errors per second.
M6100 Series Switches
Chassis Commands
36