Arp Access-List; Permit Ip Host Mac Host - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

arp access-list

Use this command to create an ARP ACL.
Format
arp access-list acl-name
Mode Global Config
no arp access-list
Use this command to delete a configured ARP ACL.
Format
no arp access-list acl-name
Mode Global Config

permit ip host mac host

Use this command to configure a rule for a valid IP address and MAC address combination used in
ARP packet validation.
Format
permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config
no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Format
no permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config
Switching Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
3-135