Show Process Cpu - NETGEAR M6100 Series Reference Manual

This command displays the user and system applications.
Format
show process app-list
Mode Privileged EXEC
Parameter Description
ID The application identifier.
Name The name that identifies the process.
PID The number the software uses to identify the process.
Admin Status The administrative status of the process.
Auto Restart Indicates whether the process will automatically restart if it stops.
Running Status Indicates whether the process is currently running or stopped.
Command example:
(NETGEAR Switch) #show process app-list
ID Name
---- ---------------- ----- --------- --------- -------
1 dataplane
2 switchdrvr
3 syncdb
4 lighttpd
5 syncdb-test
6 proctest
7 user.start

show process cpu

This command provides the percentage utilization of the CPU by different tasks.
Note: A busy CPU might not be caused by traffic processing but by various
tasks that run simultaneously.
Format
show process cpu
Mode Privileged EXEC
M6100 Series Switches
Admin Auto
PID Status Restart
15309 Enabled Disabled
15310 Enabled Disabled
15314 Enabled Disabled
18718 Enabled Enabled
0 Disabled Disabled
0 Disabled Enabled
0 Enabled Disabled
Utility Commands
169
Running
Status
Running
Running
Running
Running
Stopped
Stopped
Stopped