Show Radius Accounting - NETGEAR M6100 Series Reference Manual

------------------------ --------------------------------- ----------
192.168.37.200
192.168.37.201
192.168.37.202
192.168.37.203
Command example:
(NETGEAR Switch) #show radius servers name Default_RADIUS_Server
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
Command example:
(NETGEAR Switch) #show radius servers 192.168.37.58
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60

show radius accounting

This command displays a summary of configured RADIUS accounting servers.
Format
show radius accounting name [servername]
Mode Privileged EXEC
Field Description
servername An alias name to identify the server.
RADIUS A global parameter to indicate whether the accounting mode for all the servers is enabled or not.
Accounting Mode
M6100 Series Switches
Network1_RADIUS_Server
Network2_RADIUS_Server
Network3_RADIUS_Server
Network4_RADIUS_Server
Management Commands
128
Secondary
Primary
Secondary
Primary