Permit Ip Host Mac Host; Show Ip Arp Inspection; Arp Access-List - NETGEAR ProSafe GSM7224P User Manual

no ip arp inspection filter
Use this command to unconfigure the ARP ACL used to filter invalid ARP packets on a list of
comma-separated VLAN ranges.
Format
no ip arp inspection filter acl-name vlan vlan-list [static]
Mode
Global Config

arp access-list

Use this command to create an ARP ACL.
Format
arp access-list acl-name
Mode
Global Config
no arp access-list
Use this command to delete a configured ARP ACL.
Format
no arp access-list acl-name
Mode
Global Config

permit ip host mac host

Use this command to configure a rule for a valid IP address and MAC address combination
used in ARP packet validation.
Format
permit ip host sender-ip mac host sender-mac
Mode
ARP Access-list Config
no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Format
no permit ip host sender-ip mac host sender-mac
Mode
ARP Access-list Config

show ip arp inspection

Use this command to display the Dynamic ARP Inspection global configuration and
configuration on all the VLANs. With the vlan-list argument (i.e. comma separated VLAN
ranges), the command displays the global configuration and configuration on all the VLANs in
ProSafe Managed Switch
Switching Commands
157